Fonweld E1107H
FONWELD E1107H
Type: Austenitic Cr-Ni-Mn electrode
DIN EN1600:1997: E18 8 Mn R 5 4
AWS A5.9:92: E 307 – 16
Applications:
- Welded joints between high alloyed steels and low alloy or mild steels. Welding of high manganese alloy steel. Welded joints on structural and heat-treatable steels with high carbon content. For depositing tough, stress-equalising buffer layers when armour-surfacing with hard alloys. Wear-resisting armour coatings on rails, shunting points, switchpoint cores and impact plates.
Characteristics:
- Austenitic high-yield electrode for weld deposits with high strength and elongation values. Yields 160% metal recovery. Rust-proof and non-scaling up to 850°C. The weld metal is tough, crack-proof and wearresisting.
Current mode: DCEP / AC
Chemical analysis of weld deposit, typical values in %:
| C | Mn | Si | Cr | Ni | Fe |
| 0.08 | 6.00 | 1.00 | 18.00 | 8.00 | Balance |
Mechanical properties:
Tensile strength: >588 N/mm2
Yield strength Rp 0.2: >343 N/mm2
Elongation (1=5 d): 35%
Impact energy (ISO-V/20ºC): 70 J
Hardness (Brinell): 150 – 200 HB
Welding current:
mm Amps
2.5 x 350 100 - 110
3.2 x 450 120 - 140
4.0 x 450 150 - 180
5.0 x 450 200 – 240
Specifications
| SKU | FONWELD E1107H |
|---|
