Fonweld A/AF210
FONWELD A/AF 210
Brass filler metal.
DIN 8513: L – Cu Zn 40 (L – Ms 60)
AWS/ASTM: R B Cu Zn - A
ISO 3677: B Cu 60 Zn Si 890 - 900
Applications:
- Capillary brazing, braze-welding, and surfacing of steel, malleable cast iron, copper, copper alloys with a solidus temperature above 950C.
Characteristics:
- Brazing filler metal with good fluidity and low sensitivity to overheating.
Source of Heat:
- Oxy-Acetylene torch, gas-air torch, blow-lamp, furnace, high frequency induction.
Flux:
- F210
Availability:
- 3.0mm x 500mm (AF210 - Flux Coated)
- 3.0mm x 1000mm (A210 - Bare Rod)
Composition, typical analysis in %:
Cu | Sn | Si | Zn |
58.00-62.00 | 0.5 | 0.10-0.50 | Balance |
Mechanical and physical properties:
Working Temperature: 900C
Melting Range: 890 - 900C
Tensile strength: approx. 350 N/mm2, depending on parent metal
Hardness (Brinell): approx. 110 HB
Elongation: approx. 35%
Electrical Conductivity: 15 Sm/mm2
Specific Gravity: 8.4 g/cm3
Specifications
SKU | FONWELD A/AF 210 |
---|